Valve Accessories

Valve accessories, including a valve connector, distributor blanket, brine valve assemble, brine tank wells, riser pipes, and check valves are all used in Runxin manual multiport filter valves, automatic multiport filter valves, manual softening valves, and automatic softening valves to ensure a high performance filtration.

2. Faucet with Double Outlets and Triple Close 1.The outlet water is divided into pure water and concentrated water.
  2.While closing the faucet, the pure water outlet, wastewater outlet and inlet of RO system are closed at the same time.
3. READ MORE
2. Wireless Auto Shut-off Valve 1.Wireless layout of monitoring points
  2.Multi-point intelligent monitoring
  3.Remote sensing
  4.Power failure protection
  5.No power alert
3. READ MORE
2. Ball Valve Controller The controller is exclusively used to outfit electric ball valves with a ceramic core to ensure filtering, softening, and mixed bed desalination occurs. It is widely used in swimming pools, RO, and residential water treatment systems.
3. READ MORE
2. Valve Connector Specifications: 3/4″F *×1″M
  Dimension: 32mm×25mm×31mm
  Material: ABS
  Nominal size:0.6MPa ...
3. READ MORE
2. Distributor Basket Distributor basket is used for uniform water distribution.
  Sizes available: 1.5", 3/4" and 1"
  Material: ABS ...
3. READ MORE
2. Brine Valve Assembly Brine valve assembly plays two roles in a regeneration system. The first is to prevent air from entering the resin tank by floating a ball in the brine valve at the brine and slow rinse stage in a process called an air check function.
3. READ MORE
2. Brine Valve Slotted brine tank wells are tubes inside the brine tank where the float assembly is located. They are slotted at the bottom to allow the brine water to be pulled into the softer during the regeneration process while still filtering out raw salt.
3. READ MORE
2. Riser Pipe RUNXIN offers 5 different riser pipes in different specifications. The length is 2 meters, or customized according to specific customer requirements.
3. READ MORE
2. Check Valve Check valves are installed at the pump outlet and valve, and are used for return stopping and protection. They are also installed at the water storage tank inlet to prevent back flowing after decompression in either a horizontal or vertical manner.
3. READ MORE
2. Iron and Manganese Removal Device The F107A iron and manganese removal equipment forms manganese greensand filters with an automatic backwash for iron reduction collected with the F67C3 valve. It removes iron and manganese from the water...
3. READ MORE
2. Bypass Valve Bypass valves are a back-pressure regulator primarily used to adjust the port pressure through control of the bypass passenger in a water treatment system. It can also be used in softening systems when the bypass valve replenishes untreated water under softener maintenance.
3. READ MORE
2. F128 Pressure Relief Valve F128 pressure relief valve has functions of pressure reducing and pressure stabilizing, suitable for regulating pressure of 1-3.5bar. Pressure gauge is configurable.
3. READ MORE